FRP Cooling Towersare
manufactured with Glass reinforced plastic mostly in wind with
standing bottle type and square type models. It is a
mechanical type Counter Flow Tower. FRP Cooling tower intakes
the air from bottom and discharge the waste heat at the top.
Since the water is traveling from top and the air passes from
bottom to top, the water droplet have more direct contact time
with air. The wet cooling Towers are cooled with the help of
evaporating some proportionate quantity of cirulating water.
The bottle type tower casing is filled with Honeycomb type
PVC FILLS. The rotating water distributor sprinkler is fixed
in the top of the inlet pipeline and the same distributes the
hot water evenly over the Honeycomb Fill media. The sprinkler
will be operated with self-propulsion system. The PVC Fills is
corrugated with channels between each flutes to prevent the
blockage and giving more and large surface area per unit
volume. The cold air meets the cold water at the bottom of the
infill providing maximum evaporation and heat transfer in the
infill.
Finally FRP Cooling Towers are more compact, light
in weight, least power consumption, long-lasting, Durable and
lowest maintenance expenditure. Since Hot dip galvanized
structural and stainless steel fasteners are used, FRP Towers
are corrosion Free.
