Cooling Tower India

Choose Language :

  • Facebook
  • Twitter
  • Linked In
  • You Tube
  • Blogger
  • Google Plus
map map map map
map
Cooling Tower Exporters
  • perry_johnson_registrers_inc
  • anab
  • ukas
  • mgmt_sys





Round shape cooling Towers

heat-exchanger-quote

Rounded shape cooling towers, the material balance around a wet, evaporative cooling tower system is governed by the operational variables of makeup the volume of fluid which passes through a given surface per unit time, a type of vaporization of a liquid that only occurs on the surface of a liquid and windage losses, draw-off rate, and the concentration cycles.When the property of a solid, liquid, or gaseous chemical substance called solute to dissolve in a solid, liquid, or gaseous solvent to form a homogeneous solution of the solute in the solvent, of these minerals have been exceeded they can precipitate out as mineral solids and cause fouling and heat exchange problems in the cooling tower or the piece of equipment built for efficient heat transfer from one medium to another.

Round shape cooling tower is the circulating water flow that is removed (usually discharged to a drain) in order to maintain the amount of Total Dissolved Solids,other impurities at an acceptably low level. Higher TDS concentration in solution may result from greater cooling tower efficiency. However the higher the TDS concentration.The water that must be added to the circulating water system in order to compensate for water losses such as evaporation, drift loss, blow-out, blow-down, etc.

The temperatures of the recirculating water, piping and heat exchange surfaces determine if and where minerals will precipitate from the recirculating water. Often a professional water treatment consultant will evaluate the makeup water and the operating conditions of the cooling tower and recommend an appropriate range for the cycles of concentration. The use of water treatment chemicals, pretreatment such as water softening, The evaporated water leaves its dissolved salts behind in the bulk of the water which has not been evaporated, thus raising the salt concentration in the circulating cooling water.