Cooling Tower India

Choose Language :

  • Facebook
  • Twitter
  • Linked In
  • You Tube
  • Blogger
  • Google Plus
map map map map
map
Cooling Tower Exporters
  • perry_johnson_registrers_inc
  • anab
  • ukas
  • mgmt_sys





Square shape cooling Towers

heat-exchanger-quote

Square shape cooling tower is a design in which the air flow is directed perpendicular to the water flow (see diagram below). Air flow enters one or more vertical faces of the cooling tower to meet the fill material. Water flows (perpendicular to the air) through the fill by gravity. the air flow is directly opposite to the water flow (see diagram below).

Air flow first enters an open area beneath the fill media, and is then drawn up vertically. The water is sprayed through pressurized nozzles near the top of the tower, and then flows downward through the fill, opposite to the air flow. The cool water absorbs heat from the hot process streams which need to be cooled or condensed, and the absorbed heat warms the circulating water. The warm water returns to the top of the cooling tower and trickles downward over the fill material inside the tower.

Square shape cooling tower contacts ambient air rising up through the tower either by natural draft or by forced draft using large fans in the tower. That contact causes a small amount of the water to be lost as windage (W) and some of the water (E) to evaporate. This method works on the principle that continuous particle removal will keep the system clean. Manufacturers typically package side-stream filters on a skid, complete with a pump and controls. For high flow systems, this method is cost-effective. Properly sizing a side-stream filtration system is critical to obtain satisfactory filter performance.